 Quote: |
|
Originally Posted by juvehab 1.) if I run that amp @ 4ohm's is 75w a side enough power for the Dls or should I run the fronts in a 2ohm load to get 110w and the sub @ 4 ohm
2.)what gauge wire should I use?
3.)Also where is the best place to mount those tweets without butchering my door panels?
4.)should I run an rca from my sub out on my deck to my Amp? |
1.) Run @ 2ohms
2.) You will be safe with 8ga, but i would recommend using 4ga
3.) Pillers near the front windsheild, can use double sided 3m tape, or screw it into place.
4.) YES! this you NEED to do, otherwise you will have no output from the sub. You MUST run a pair of RCA's as well as a REMOTE LINE to the sub amp from your deck.
