 Quote: |
|
Originally Posted by Stuart Usually a vehicle manufacture will use there own wiring harness for there speakers and such. You can use the factory wiring but you might have to cut off the end of the factory connector and use some spade terminals to connect to the speaker.
*NOTE* Leave about 3" of wires on the end of the factory connector that way if for any reason you have to switch back to the factory setup you can just use a butt connector or solder to connect it back up.
Not sure if that helps you or not.
BTW: What kinda car are you installing the speakers on? |
oooo, he hit everything i forgot ta say. although I don't think they are spade terminals. I don't know the actual name but there is a female and male terminal and ya stick one into the other for an easy connection. You will need the female terminals for the end of your factory wires. OR I think you can by adapters off of cardomain that connect to your factory wire and will have pos and neg labeled so you can hook the wires strait up to the speaker. I think.
