I have a Kenwood KDC-205 Deck.
Now, it only has one pair of RCA outputs. So I am running those to my Sub amp, and for the speaker wires, I have those in a line converter, to convert to RCA wires, to run to my other amp.

Now my questions are.
The wireing on the back of the deck follows.

- Pair of Green, and Green w/ Black strip. Rear L
- Pair of White and White w/ Black Strip. Front L
- Pair of Brown and Brown w/ Black Strip. Not labled, but is beside the White pair. I would assume it is the Front Right.
- Pair of Purple and Purple w/ black strip. Not labled, but is beside the Green pair. I would assume those are the Rear Right.
- Now. Beside the Brown set, is a set of Blue and Blue w/ Black strip. I do not know what these are for. It seems to be a 5th speaker wire. Could it be a wire version of the RCA output/sub output, if the RCA's are not used ?
- Next, is a Red wire. I would assume that is the +12V wire ?
- A black wire. I would assume that is Ground ?
- A Tan wire that says Tel Mute. I don't know what that would be for ?
- Lastly, a Yellow Wire. Would this be Remote ?

If I can all this sorted out, it would be a big help.
Thanks.