I'm looking for a place to cut me a sheet of 1/2" plexiglass for my custom enclosure. Anywhere in the GTA which does it and roughly how much?

Gary

a small torch, and a bus shelter is a good source... jsut do it late at night.

now I know what happened to all the bus shelters around KW...

__________________


TEAM NOT LOUD
TEAM ELECTRO-PRO
TEAM MAXIMUM THRESHOLD

2005 - 161.2 dB CERTIFIED - 2-RE MT12's on 4 American Bass 200.1

2007 - STREET C - 15" RE MT in a 1995 NEON!
154.2dB 4 AmericanBass 500.1's with way too much voltage drop

2008 - Street C - 15" FI BTL in a 1999 VW Jetta TRUNK!
149.0 on 1 - Powerbass XA3000d
not a bad start for a raw box

Try these guys:

http://www.paplastics.com/

I've purchased plastic materials from them and they're reasonably priced with a variety of plastics in stock.

Most glass shops will do it for you.
Try the industrial type shops and not the Speedy Autoglass types as they usually don't have thick enough glass and usually cost more.

I went to an industrial glass place and 2'x4' was $40 for me and they cut it for free into what ever I wanted.

__________________
Pioneer - MB Quart - OZ
http://www.cardomain.com/id/37554
"Your sister is hot but your mom does that thing with her tongue..."

You got the place's name or contact info?

I beleive I got mine at ICG glass in Whitby.
905-666-8441.
If that's not the place I can give you directions to the shop. Get off at Brock St. in Whitby and go south. First lights you come to make a right. Then take the first road on your left and the shop is just on your right about 20m down the street.

__________________
Pioneer - MB Quart - OZ
http://www.cardomain.com/id/37554
"Your sister is hot but your mom does that thing with her tongue..."