I'm trying to put 4-10's into the trunk of my cavy and not take up a hole crap load of space.

I'm Thinking of building a box with 2 of the subs on the top and 2 on the front.

Also how much room should there be between the subs magnets from the sub on the top to the sub on the side.

Would this work or should i just go with 2 - 10's on the same side.

Thanks for the help

__________________
Talk to me! msn --> aaronone321@hotmail.com

Alpine 9805
Kicker S10L5 (2004) in ported box
Power Acoustik LT980/2 500 rms @ 4 ohms mono
Power Acoustik LT720/4 70 rms @ 4 ohms x 4
JBL 5 1/4" components

u may as well stick with 2 subs my buddy did 4 in a sunfire and it wasnt as great as we figured , if u want to go for then do it but brace the S*** outta it

Four 10's done properly is going to take up most of a cavy's trunk. Sure you could put them in a really small sealed enclosure but.................why?

I don't know what type of 10's you're planning on using but a consideration might be to use a single 15" driver as it will have more cone area than two 10's and will use a smaller enclosure than the four 10's. The cost of four 10" driver's should get you one really nice 15 incher also. A high-end single 15" driver, ported, with plenty of power should be more than plenty for most user's.

__________________
Pioneer - MB Quart - OZ
http://www.cardomain.com/id/37554
"Your sister is hot but your mom does that thing with her tongue..."

build a box wtih 2 on top and 2 firing into one of the sides of the car. dont fire them forward if u want good sound.

__________________
Team Fear Of Bass

2006 & 07 - Canadian Street A & B Record Holders
2007 Street A - 155.2 db's
2007 Street C - 154.8 db's
2007 CSPL Amature 1 Champion - 150.8 db's

if you had the set up as a push pull set up / a back loaded set up ,one firing tuo of the box and the other firing into the box (Compound Loading)

__________________
EVERY FAMILY HAS A RETARD IN IT. IF YOU THINK THAT YOURS DOESNT HAVE ONE, THEN ITS PROBABLY YOU.

there RF P1's that i got for 6 bucks each ( repaired cones)

im gonna go with a sealed box of recommended size. (Rf recommends .59 cubes per sub)

im going to put 3 subs facing the back and one firing upward. the box in total is going to be 16"x11"x32"-3/4" mdf



i figure it should be louder then my S10L5 ported.

__________________
Talk to me! msn --> aaronone321@hotmail.com

Alpine 9805
Kicker S10L5 (2004) in ported box
Power Acoustik LT980/2 500 rms @ 4 ohms mono
Power Acoustik LT720/4 70 rms @ 4 ohms x 4
JBL 5 1/4" components