has anyone used the box calculator on hte RE site? if so is it accurate?
im looking to build a box for 2 10" Soundsplinter RL-i's
Enclosure Recommendations from the SS site
Acceptable:
0.4 - 0.95 cu ft net volume sealed
0.3 - 1.2 cu ft net volume vented, Fb = 22 - 36 Hz
Optimal Home:
0.85 cu ft net volume vented, Fb = 22 Hz
Optimal Car:
0.65 cu ft net volume sealed
0.45 cu ft net volume vented, Fb = 27 Hz
Specs
Dual 4 Ohm
Qts: 0.276
Qes: 0.303
Qms: 3.179
Fs: 25.37 Hz
Re: 5.71 Ohm
Ls: 5.208 mH
Rp: 8.554
Vas: 44.74 L
Mms: 148.1 g
Cms: 265.5 u
Bl: 21.1 T*m
SPL: 85.65 dB
Sd: 0.0307 m^2
Xmax: 20.0 mm
http://www.soundsplinter.com/rli10_subwoofer_information.html

i came up with this but i have no idea if it will be good, i listen to mostly hiphop

__________________

141.1db at the dash with TL

anyone?

__________________

141.1db at the dash with TL

Sound splinter subs do work well in smaller ported enclosures, i would say tuning maybe a little higher maybe 35 hz. 30 is a little low for 10s but its all in preference.

__________________
L0W T0N3Z AUDIO

NORTHERN AUTO SOUND