oh ,and if you have all the precise measurements it might be worth checking out a sign shop with a cnc router to cut all the pieces with a bevel cut(and to see if they have any plexi in stock)...it's just a bit tricky to cut plexi perfectly(which I'm thinking you want to achieve).

__________________
spectra5
Kenwood excelon x201t
Kenwood KFC-W3085
jvc KD-G430

Pictures are on my website at soundsgoodauto.com

__________________
Pioneer Premier DEH-P800PRS
Pioneer Premier TS-A 520PRS
Pioneer Premier TS-A 720PRS
Digital Designs M3
Digital Designs S4
Digital Designs A2 for DD tweeters in my dash
Digital Designs 9110d x 2
Streetwires makes my world go around
Hushmat keeps it real
Kinetik Batteries keep it running
142db in an SQ Sentra.

thats a good idea...i think i might do that.

To make a solid box, routered or rounded corners are the best looking, but also hard to acheive, they have to be sanded, buffed and then if you're good enough, you can use a propane torch to slightly melt the edges and it cools super clear, but you can burn.

It might be a lot easier and just as good looking to make the top and back peices out of clear.

__________________

also to keep expences low you can make just the top of the box to show off the subs. or maybe some other combo between MDF and Plexi

__________________
Big box installer (Timmins)
02 GRAND CARAVAN SPORT
I change my mind like i change my underwear lol

new system coming.
-CD7200MKII runing active
-2x RF400-4
-3 set of energy components. 2 front 1 rear
-4x energy 10" subs
-DDSS1 curently have
-Monster cable RCA and wires all over
-2 1/0 to DDSS1 and 4 gauge to each RF amps
-new alternator 160amps
-sound deadning

expenses aren't a concern. like i said, im getting the plexiglass from a friend for free.

i thought of having the plexiglass cut with a waterjet cutter. the cuts are computerized and the edges would be flawless im sure.

i found this company in Barrie called ADVANTEC WATERJET INC..i sent them an email, now waiting for a response.

id prefer something closer to the GTA though

on a router table the cuts are also computerized and the edges are also flawless....and your for sure to find dozens in toronto...just call around.

__________________
spectra5
Kenwood excelon x201t
Kenwood KFC-W3085
jvc KD-G430

I personaly used 1/2" plexi simple cuve bent to mimic the rear of the car. We used the mdf box as the mold in the oven to produce the bend. Then resond inside the box and painted it body color. The out side was carpeted to the trunks color. Even after all these years it never goes old looking at both side of the sub. My only real problem was to get the plexi super clean and static free. Have fun my friend and plan it out. The results are truly worth it.

__________________
Home of Team Mini
Retired SQ Mini
Semi retired DB Explorer
06 Western Canada's Street A Champion
Mini SPL on the horizion!

heres one that i did 5 years ago or so(was my first box i ever built)

__________________

141.1db at the dash with TL