Just picked up a set of these

from what I have read about them, they are strictly a midbass driver (30-500hz response). Anyone used these? Any chance I can get away with running just these and tweeters up front, along with subs in the back? thanks

__________________
Location: Vancouver, B.C.

I have owned them but never tried to xover them with tweets. They don't go very low so I have a feeling they might do alright.

__________________
Please SQ'se my SPL'ing

I'd be more concerned about the upper end of their range.

That 500hz limit leaves a large gap between them and your tweeters.....I have been using Orion MB6's for years and have always had a 5.25 midrange to fill the hole. If install space is an issue, maybe a 4" coax instead of a dedicated tweeter would work better.

Another 2 cents down the drain....

__________________
BigRedGuy
Still bumpin' after all these years
Kenwood/AudioControl/Orion/JL Audio/Lightning Audio

Thanks guys, I have a set of Infinity Beta One tweeters that run down to 1.5khz using the factory crossover, might have to experiment a bit. Also have the matching 5" mids, maybe I will do a redesign on my door panels.

__________________
Location: Vancouver, B.C.

re do the panels, always looks good if anything:P

__________________




TEAM DEAFTRAPS
Kevin Miranda

How bout a good explanation why I cant have dose audio sales rep in sig?? not trying to sell anything...again... it would be fine if I said future shop installer LOL

those RMB8's WILL NOT be any useful as midrange drivers, even if you have horns playing below 1Khz. they are truly midbasses so you will need something to fill in the gap between your tweets and the 8's.

__________________
Sublime Simplicity is all too rare 92 300ZX TT stage III