Welcome to Canadian Car Audio - Canada’s #1 Car Audio Forum   Members
 

Reply
 
LinkBack Thread Tools Display Modes
Old 10-05-2008, 02:22 PM   #1 (permalink)
I wan't to change my setup, Subwoofers
CCA Back Bacon
 
Join Date: Oct 2007
Location: Quebec
iTrader: (0)
Posts: 3
Hi, I have a 12" Alpine type s in a vented Bassworks box( pretty big ) driven by a Pioneer GM-7100M (RMS Power at 2 Ohms = 360 W x 1 RMS Power at 4 Ohms = 250 W x 1). head unit : pinoeer DEH-P7700MP

I'm listening to Punk Rock, Death Metal, Metal, Hard-rock and a little bit of Dr. D.R.E amd Cypress Hill.
I find my bass not tight enough and not fast enought to hadle my music preferences.

Do you think that two 8" subwoofer in a sealed box will do the job?
Should I use two SVC 4" sub to get the 360w at 2 ohms of my amp
What brand and model of subs should I go for?

Sry for my english
Hydron is offline   Reply With Quote
Old 10-05-2008, 03:11 PM   #2 (permalink)
CCA Hoser
 
1sweetLincoln's Avatar
 
Join Date: Aug 2008
Location: southern alberta
iTrader: (1)
Posts: 66
U should do 4 6x9's in a sealed box...
1sweetLincoln is offline   Reply With Quote
Old 10-05-2008, 05:02 PM   #3 (permalink)
CCA Hoser
 
godzilla1978's Avatar
 
Join Date: May 2007
Location: ont- oshawa
iTrader: (0)
Posts: 181
Images: 7
Quote:
Originally Posted by Hydron View Post
Hi, I have a 12" Alpine type s in a vented Bassworks box( pretty big ) driven by a Pioneer GM-7100M (RMS Power at 2 Ohms = 360 W x 1 RMS Power at 4 Ohms = 250 W x 1). head unit : pinoeer DEH-P7700MP

I'm listening to Punk Rock, Death Metal, Metal, Hard-rock and a little bit of Dr. D.R.E amd Cypress Hill.
I find my bass not tight enough and not fast enought to hadle my music preferences.

Do you think that two 8" subwoofer in a sealed box will do the job?
Should I use two SVC 4" sub to get the 360w at 2 ohms of my amp
What brand and model of subs should I go for?

Sry for my english
your type s is not getting enough power which is most likely why it is not tight enough. You are also goiong to want to scrap the bassworx box and get a properly tuned box for your sub. The twelve if powered properly will kill two 8's.
__________________
1993 honda civic dx
Security: compustar 2way
Head Unit: Alpine 9886
Amps: MTX mxa6001, MTX TC4004
Wiring: stinger
Mids & Tweeters: mb quartz rc216
Sub: 12" ssd fi audio in custom ported box(2.6 cu ft) tuned to 32 Hz
SPL: 140.3 at the dash at 38hz(Door open)138.7 with music tested with a term lab mic
godzilla1978 is offline   Reply With Quote
Old 10-05-2008, 07:16 PM   #4 (permalink)
Supporting Member
 
John__Taylor's Avatar
 
Join Date: Aug 2008
Location: ON Newmarket
iTrader: (3)
Posts: 346
Quote:
Originally Posted by Hydron View Post
Hi, I have a 12" Alpine type s in a vented Bassworks box( pretty big ) driven by a Pioneer GM-7100M (RMS Power at 2 Ohms = 360 W x 1 RMS Power at 4 Ohms = 250 W x 1). head unit : pinoeer DEH-P7700MP

I'm listening to Punk Rock, Death Metal, Metal, Hard-rock and a little bit of Dr. D.R.E amd Cypress Hill.
I find my bass not tight enough and not fast enought to hadle my music preferences.

Do you think that two 8" subwoofer in a sealed box will do the job?
Should I use two SVC 4" sub to get the 360w at 2 ohms of my amp
What brand and model of subs should I go for?

Sry for my english
I'm not a fan of the ported boxes myself, (probably just havent heard a good one yet) so I sealed mine and find the bass much less "rumbly". My Bassworx box had 2 slotted ports and was tuned to 38hz. I used heavy plastic as a liner and then used that expanding foam spray insulation to fill up the ports inside the box, and about halfway full from the top on the outside of the box.

I like the sound much better but you will be needing more power to overcome the resistance of the air on the back of the sub. Well, according to Infinitys documentation anyway.

Cheaper than buying a new box!

John
__________________
Physics, the silent killer.
John__Taylor is offline   Reply With Quote
Old 10-05-2008, 08:40 PM   #5 (permalink)
CCA Back Bacon
 
Join Date: Oct 2007
Location: Quebec
iTrader: (0)
Posts: 3
here are my three options
1. I keep my type s and put it in a sealed box ( what size? )
2. I buy a CDTaudio EF-100 - 10'' - 250wrms - svc 4ohm in a sealed box and sell my type s and the ported box
3. I buy 2 CDTaudio EF-8CF - 8'' - 200wrms - svc 4ohm in a sealed box and use my 360rms at 2ohms from my amp and sell my type s and the ported box

What would you do????
Thanks
Hydron is offline   Reply With Quote
Old 10-06-2008, 09:02 AM   #6 (permalink)
CCA Back Bacon
 
Join Date: Oct 2007
Location: Quebec
iTrader: (0)
Posts: 3
up .
Hydron is offline   Reply With Quote
Old 10-06-2008, 08:48 PM   #7 (permalink)
CCA McKenzie
 
r1d1n5p1nn3r5's Avatar
 
Join Date: Apr 2007
Location: Ontario Sudbury
iTrader: (1)
Posts: 581
How about, you just do the right thing. Properly ported box ( small size ) and not worry about it anymore.
__________________
LOW TONEZ AUDIO
r1d1n5p1nn3r5 is offline   Reply With Quote
Old 10-06-2008, 10:29 PM   #8 (permalink)
poser wannabe asshole
 
sx4life's Avatar
 
Join Date: Mar 2007
Location: SASK, Grayson
iTrader: (1)
Posts: 1,031
Quote:
Originally Posted by godzilla1978 View Post
your type s is not getting enough power which is most likely why it is not tight enough. You are also goiong to want to scrap the bassworx box and get a properly tuned box for your sub. The twelve if powered properly will kill two 8's.

I agree with this asfar as GET A GOOD BOX!

however the notion that 1 12" type S will rule over 2 8's I disagree I would put up 2 DD1508 subs to one them ANYDAY!

But dude build or have a proper box built for your sub. A box and properly powering your sub will make such a huge difference
__________________




TEAM DEAFTRAPS
Kevin Miranda

How bout a good explanation why I cant have dose audio sales rep in sig?? not trying to sell anything...again... it would be fine if I said future shop installer LOL
sx4life is offline   Reply With Quote
Old 10-06-2008, 10:53 PM   #9 (permalink)
CCA Hoser
 
Join Date: Jun 2008
Location: Edmonton AB
iTrader: (0)
Posts: 75
Quote:
Originally Posted by sx4life View Post
I agree with this asfar as GET A GOOD BOX!

however the notion that 1 12" type S will rule over 2 8's I disagree I would put up 2 DD1508 subs to one them ANYDAY!

But dude build or have a proper box built for your sub. A box and properly powering your sub will make such a huge difference
1508s aren't cheap, you could buy a pair of type R 12s for the price you would pay for the 1508s.
__________________
lawl load
CoreyC is offline   Reply With Quote
Old 10-07-2008, 01:33 AM   #10 (permalink)
poser wannabe asshole
 
sx4life's Avatar
 
Join Date: Mar 2007
Location: SASK, Grayson
iTrader: (1)
Posts: 1,031
LOL that depends on who u r!!!!

not to mention there was no specification to which 8's was just stating a fact.... but u are right depending on who u are u could get a pair of type r
__________________




TEAM DEAFTRAPS
Kevin Miranda

How bout a good explanation why I cant have dose audio sales rep in sig?? not trying to sell anything...again... it would be fine if I said future shop installer LOL
sx4life is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

» Advertisers












advertise here

» Recent Threads
Installer Needed for new Milton Location
Last post by FrankB
Today 04:08 PM
hey everyone!
Last post by 420guy
Today 03:50 PM
Annual X mas wish list 2008
Last post by danyman
Today 03:44 PM
Online Advertising | Credit Cards UK | Payday Loans | Credit Report | Debt Help

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.2.0
Canadian Car Audio
Page generated in 0.35724 seconds with 12 queries