hey, just kind of curious.. is there a difference between midrange and midbass? if you were to say that you have a component set and part of the set is a 6.5" "mid"... what is this classified as, a midrange speaker or a midbass speaker.. or are they the same?

just something i was curious about. always refered to my mids as "mids" without actually knowing the difference. thanks!

__________________
Vehicle A - Kenwood eXcelon KDC-X979 HU; Kenwood eXcelon 5.25 components in q-forms; Rockford Punch 75.2; Kenwood eXcelon KAC-X810D; American Accessories 1.2f capacitor; 1 Pioneer Premier TS-W2000SPL in a Bass Slammer box @ 38Hz

Vehicle B (daily driver budget system) - Alpine CDA-9830 HU; Rockford Fanatic X 6.5 components; Pioneer GM-H200; (2) Kaption COMP-108 10's wired to 4ohm in a Kaption factory box tuned to 35Hz; Audiocontrol 2xs (only deck installed so far on this one i'm getting started soon)

someoen correct me if im wrogn but usualy midbass is 80-200 htrz and mid range is 200 hrtz to 3 ish k ??d

__________________
Talk to me! msn --> aaronone321@hotmail.com

Alpine 9805
Kicker S10L5 (2004) in ported box
Power Acoustik LT980/2 500 rms @ 4 ohms mono
Power Acoustik LT720/4 70 rms @ 4 ohms x 4
JBL 5 1/4" components

ok cool. yeah i was just reading up on the manual for my components (Rockford Fanatic X's from the 2000 product line) and the freq response says 50Hz - 5kHz, i assume that is in the perfect conditions though. i wouldnt expect my mids to actually play at 50Hz. was just curious what to call these 6.5" "mids". just plain old midranges, lol.

thanks for the reply

__________________
Vehicle A - Kenwood eXcelon KDC-X979 HU; Kenwood eXcelon 5.25 components in q-forms; Rockford Punch 75.2; Kenwood eXcelon KAC-X810D; American Accessories 1.2f capacitor; 1 Pioneer Premier TS-W2000SPL in a Bass Slammer box @ 38Hz

Vehicle B (daily driver budget system) - Alpine CDA-9830 HU; Rockford Fanatic X 6.5 components; Pioneer GM-H200; (2) Kaption COMP-108 10's wired to 4ohm in a Kaption factory box tuned to 35Hz; Audiocontrol 2xs (only deck installed so far on this one i'm getting started soon)

calling those mids is right. A midbass is used just for midbass and usually pounds more compared to a mid/midbass speaker. I find using a midbass up front along with mid/tweet(3way) to be much more satisfying than just a 2 way system. If you try a 3 way system you'll love it!

__________________
If it ain't broke, modify it and make it better

mmmm yea maybe further along down the road.. heh. i need an amp to power my lil 2-way system for now. only running them off the deck, i never amped them before but they say i should.

however i think i will be bashed alot if i hook them up my 150RMS Jensen 2channel? lol. what do yas think.

thanks!

__________________
Vehicle A - Kenwood eXcelon KDC-X979 HU; Kenwood eXcelon 5.25 components in q-forms; Rockford Punch 75.2; Kenwood eXcelon KAC-X810D; American Accessories 1.2f capacitor; 1 Pioneer Premier TS-W2000SPL in a Bass Slammer box @ 38Hz

Vehicle B (daily driver budget system) - Alpine CDA-9830 HU; Rockford Fanatic X 6.5 components; Pioneer GM-H200; (2) Kaption COMP-108 10's wired to 4ohm in a Kaption factory box tuned to 35Hz; Audiocontrol 2xs (only deck installed so far on this one i'm getting started soon)

That should be just fine for a set of components.

__________________
Email: coulter.eastwood_at_gmail.com
MSN: c0ulty_at_hotmail.com

yeah should do the trick for now eh? its not top of the line by any means but i'm sure if i keep the gains set right i can keep the distortion down to as minimum as possible with the circumstances.

__________________
Vehicle A - Kenwood eXcelon KDC-X979 HU; Kenwood eXcelon 5.25 components in q-forms; Rockford Punch 75.2; Kenwood eXcelon KAC-X810D; American Accessories 1.2f capacitor; 1 Pioneer Premier TS-W2000SPL in a Bass Slammer box @ 38Hz

Vehicle B (daily driver budget system) - Alpine CDA-9830 HU; Rockford Fanatic X 6.5 components; Pioneer GM-H200; (2) Kaption COMP-108 10's wired to 4ohm in a Kaption factory box tuned to 35Hz; Audiocontrol 2xs (only deck installed so far on this one i'm getting started soon)

its an old XA-3022LX. first amp i ever bought.. about 6 years ago. 70X2 RMS should be ok for the time being.

__________________
Vehicle A - Kenwood eXcelon KDC-X979 HU; Kenwood eXcelon 5.25 components in q-forms; Rockford Punch 75.2; Kenwood eXcelon KAC-X810D; American Accessories 1.2f capacitor; 1 Pioneer Premier TS-W2000SPL in a Bass Slammer box @ 38Hz

Vehicle B (daily driver budget system) - Alpine CDA-9830 HU; Rockford Fanatic X 6.5 components; Pioneer GM-H200; (2) Kaption COMP-108 10's wired to 4ohm in a Kaption factory box tuned to 35Hz; Audiocontrol 2xs (only deck installed so far on this one i'm getting started soon)