| CCA Hoser
Join Date: Nov 2005 Location: Ontario, Val Caron Posts: 217
| Yes, each coil is rated at 4 ohms.
To run the sub properly, you have to hook both coils to the amplifier.
There are 2 ways to do this
1. Parallel
2. Series
If you wired them in parallel it would make 2 ohms
If you wired them in series, it would make 8 ohms.
Logically the lower the resistance, the more power.
So you would want a 2 ohm stable amplifier that could produce around 350 watts rms @ 2 ohms.
Got it? |