Hey so ive sold my amps and have decided to rebuild my system once again but ive come to a point where i dont know which route to take and need some advice. I am running polk audio DB series 6.5 components and 3way 6x9's and cant decide on an amp to power them and could use the help... the choices are between a JL 300/4, JL 450/4, JL M6600(6 channel to POSSIBLY run dynamics) and an audison SRX4, what would be the best way to go? i am also considering removing the 6x9 and using a 4channel to run dynamics so any advice would be great! thanks

All those amps will do a great job for you, personally I would try the 450/4.....running the four corners it will do 150 X 2 front and 75 X 2 rears....active you have 150 for the mids and 75 for the tweets......

My $0.02 worth

well thats an option i was looking at but then i also thought if i ran the 6channel, i can bridge it to 4chan and run all the speakers in the ras as is rite now and later if the need arise i could run all 6 speakers OR remove the 6x9 and run 4channels for the 6.5 driver and tweeter...ive been confused for the past few days thinking of so many different configurations

Welcome to the sickness.....

Your confusion will only end when you decide on the final setup.....once you know how you will finish the system, you will know which amp will fit best in the end....how you use it for now is where you get to play around with it....

HTH