Do i just splice the remote wire and run it to both amps?

I have 4 guage from the bat to the amp, and i need 8 for the 2nd amp im installing, so i need a distro that takes in 4 and spits out 4 and 8?

any help would be appreciated

__________________
Pioneer 770MP<br />3 - X-One 15s<br />Crossfire BMF1000D <br />RF 8004<br />Alpine TypeS Components<br />Alpine TypeS Coax<br />GMC Yukon<br />Wall<br />32Hz

Yeah you use a distro block and yes you splice your remote wire if you are going to be running 2 amps.

Make sure you fuse the distroblock properly as you are going to be using two different amps that will pull two different amounts of current.

SHY

__________________
A Gangster but a Gentleman

well one amp is a mmats d300hc thats running of an 80 amp fuse just fine....and the other amp is a USX 4065 should i run a 50 or less to that? or what should i use,

__________________
Pioneer 770MP<br />3 - X-One 15s<br />Crossfire BMF1000D <br />RF 8004<br />Alpine TypeS Components<br />Alpine TypeS Coax<br />GMC Yukon<br />Wall<br />32Hz

devide the power by the voltage. That should give you a working number and yeah around 50 should do.

This is roughly speaking, you can get all technical and all but, this should do


SHY

__________________
A Gangster but a Gentleman