well i have an eclipse SW6103DVC, and the dust cap has come apart from the cone. its only about 2.5-3" long, right around by the surround. so what could make this happen? its my neighbors sub, he bought it from A&B 2 months ago and was told it was a demo sub, but hardly used(just put into the boards 3 weeks before hand).

so now were looking for a new sub. anything too look at? has too be 10", 5.5" deep max, 200 WRMS is going too it, small box(.5F^3).

(oh i will get some pics up so you guys know what im talking about).

Thanks
Dallas

__________________
87 Nissan Hardbody/truggy. Tube frame. full EXO. 39.5" IROKs. 18" FOA coilovers ft/rr. D60's. 5.89

4.3/4l60e/207/205-all sold. now putting a TBI 350, 700r4(.5"valve, corrvette servo, red band, shift kit), 203/205 triple stick.

______________________________/\/ / _\'' /\/\ ()_______________________________

[ July 12, 2005, 04:23 PM: Message edited by: WD21 ]

__________________
87 Nissan Hardbody/truggy. Tube frame. full EXO. 39.5" IROKs. 18" FOA coilovers ft/rr. D60's. 5.89

4.3/4l60e/207/205-all sold. now putting a TBI 350, 700r4(.5"valve, corrvette servo, red band, shift kit), 203/205 triple stick.

______________________________/\/ / _\'' /\/\ ()_______________________________

wow i should of washed it befor i took the pix, it lookes dirty

__________________
87 Nissan Hardbody/truggy. Tube frame. full EXO. 39.5" IROKs. 18" FOA coilovers ft/rr. D60's. 5.89

4.3/4l60e/207/205-all sold. now putting a TBI 350, 700r4(.5"valve, corrvette servo, red band, shift kit), 203/205 triple stick.

______________________________/\/ / _\'' /\/\ ()_______________________________

If he doesn't have a warranty with it, I would clean up any old glue from the separation and try some autogoop to glue it back together. Doesn't look too bad.

yeah autogoop does a decent job, i put one of my rockford mids back together with it and it still pounds!

__________________
Vehicle A - Kenwood eXcelon KDC-X979 HU; Kenwood eXcelon 5.25 components in q-forms; Rockford Punch 75.2; Kenwood eXcelon KAC-X810D; American Accessories 1.2f capacitor; 1 Pioneer Premier TS-W2000SPL in a Bass Slammer box @ 38Hz

Vehicle B (daily driver budget system) - Alpine CDA-9830 HU; Rockford Fanatic X 6.5 components; Pioneer GM-H200; (2) Kaption COMP-108 10's wired to 4ohm in a Kaption factory box tuned to 35Hz; Audiocontrol 2xs (only deck installed so far on this one i'm getting started soon)

Unless you want to permanently damage the woofer by performing band-aid surgery on it, I'd suggest sending it to us at Speaker City ( www.speakercity.ca ) , or another service center capable of removing the dustcap, and old glue, then re-glueing the dustcap back in place with proper adhesives which are acetone based.
The woofer is still under warranty, if the date of purchase on the reciept is within 1 year. so another option is a replacement from Eclipse, you can try any authorized dealer for support.

[ July 12, 2005, 10:50 PM: Message edited by: Eli47 ]

__________________
E.C wuz here