Hey guys, finally back in work so i can get cracking on my project!

What I want to do is make custom enclosures in the trunk, behind each tail light in the gap just behind the wheel well. I don't know how else to describe this location. But anyways, I don't want to fiberglass as I already have some MDF. The shape of the area where I want to make the enclosure is in the shape similar to that of a rear quarter panel of a car.

Would it be okay to make the entire volume of the box over this weird shape with all the curves of the trunk? Or would it be best to just simply make a rectangular box that fits in this space, then just carpet the rest to give the illusion of one big enclosure, while in fact it is just a simple 7.25x12x14 enclosure?

Also, I would be using the frame of the car as the rear portion of the sub box, so should I get some sound deadening(or damping? cant remember what is that right phrase) material and cover the bare steel that will be in the enclosure?

Sorry for the confusing post, I always have a hard time explaining this. Simply put, just remember that I am using MDF(NO FIBERGLASS)and using 2 10" RF P1 subs.

ive seem weird shaped boxes before if more volume is needed in a small space but if your working with MDF then a simple rectangular box will be WAY easier to build...and then you could carpet it as you said or w/e to make it look clean.

as far as sound deadening goes you might as well deaden the whole trunk now as you will get rattles anyway...

__________________
Soon to be gear:
Amp: Alpine MRP 450 MONO
Subs Two Pioneer TS-W307D2/D4----12"
Box 1 cu ft/chamber sealed
Deck pionner DEH P6800
Front spks 5.25 kenwoods
Rear spks 6x9 pioneer 3 ways
caps Raptor 1 farad
Wiring Streetwires 4 gauge wiring kit
Battery Interstate
Alarm viper 2 way

some mismatched brands but lots of good gear coming together

I would recommend not using the panel as part of the enclsoure wall. Either fiberglass it or og with the MDF all the way around.

Making the enclosure with the weird angles isn't going to be an issue with performance/sound. Might be a bitch to build though

__________________
Pioneer - MB Quart - OZ
http://www.cardomain.com/id/37554
"Your sister is hot but your mom does that thing with her tongue..."

hey thanks alot guys!

going to start this project...monday or tuesday!


Thanks again!