i posted this in install related too, i'm not really sure where to put it, but i know here it will get the most traffic, sorry if i did anything wrong...


okay i have a 1984 Toyota Supra
it's a hatch-back with a biggish trunk area...
what i have are 2 Alpine Type-R's and a RF 300.2
what i want to do is mount them inverted, so that the magnets are visible...
now what i am asking is, i've heard that when a sub is mounted invert you should reverse the polarity that your powering it with, so you send the + line on the amp to the - pole on the sub, is this right?
also i want to bridge the amp so that only one channel is powering both the subs preferably in parallel/parallel, now to do that would i need to "Y" the + & - lines coming from the amp to the subs in order to power each subs 2 voice coils or what? i'm still pretty new to all this, and i want to get the most that i can from this amp/sub combo, as at the moment it's all i have...
also i'm running an alpine deck from last year the CDA-7893 so i've got the RCA's from the sub-out put going to the amp, so that's all good there i'm sure...
anyways any help you guys can spare would be great!

Hi, for your first question, if you're mounting both subs inverted, it doesnt matter if you reverse the polarity or not, as long as both subs are wired the same.

Your second question is a bit confusing. I think this is what you mean?
http://www.jlaudio.com/tutorials/wir...ex.html#2dvcpp
You might want to read some of the other tutorials on the JL website too.
Hope that helps a bit.

hey thanks a lot that did help quite a bit...
lol and ya sorry i tend to be confusing, lol
thanks again

i've been here for about 5 months now, i'm trying to get my butt out of here though, preferably to a town with a future

there is no car audio here anymore, lol, it's a dead town in that area, you have to hit up Edmonton for anything decent...
and i'm just working odd jobs here now trying to move on my way, but i needed money and got a easy job here so i stuck around...
thanks for all the quick help everyone too.

[ July 16, 2003, 03:32 AM: Message edited by: Inate8 ]