I found 2 faily new Old skool kicker XPL 10 " Subs.
Anyone have any info on these ?

If the model # is X10C-4 it was last produced in 1999 I believe. Cast aluminum frame, XMAX of 10.35mm, 350 watts power handling. http://thebassbin.co.uk/shop/product...ts_id/127.html Hope that helps a bit.

[ March 04, 2005, 01:40 AM: Message edited by: Jeepbeats ]

__________________
Location: Vancouver, B.C.

that one is the 1997 version, it has a higher sensitivity than the newer ones.
it has a stamped steel basket. [img]graemlins/deal4u.gif[/img]

__________________
Atomic + E Audio = Loud
153.7 Certified
'03 Canadian dBDrag Points Leader
'07 Canadian Street B SPL Leader

LOUD BROWN KICKER IS RIGHT.

But what are the exact specs of it ?

FS = 24 hertz
Qms = 10.21
Vas = 3.542 cu.ft
Mms = 2.554 oz
Xmax = 0.407 in
Sd = 52.7 sq.in
Qes = 0.529
Re = 3.1 ohms
Le = 0.427 mH
Z = 4 ohms
BL = 1.796 lb/A
Pe = 350 watts
Qts = 0.503
1-W SPL = 86.7 dB
[img]graemlins/thumb.gif[/img]

[ March 04, 2005, 09:45 PM: Message edited by: SPL donut ... ]

__________________
<img src="http://www.geocities.com/ysr80cc/banner.jpg" alt=" - " /> <br /><br />Kicker 500SI, Two 2.3KW RMS Earthquake D2's <br />DD 9515 (SPL/SQ BEAST!!!!!)<br />Full DynAudio/Scan-speak full-range set-up... Panasonic Ghost face deck

SO IS THAT GOOD ?

I just picked them up tonight.They are in mint shape almost new !

If it is the 1997 version, X10-4, here are the specs:

FS = 26.17hertz
Qms = 7.729
Vas = 4.838 cu.ft
Mms = 1.564 oz
Xmax = 0.293 in
Sd = 52.7 sq.in
Qes = 0.458
Re = 3.11 ohms
Le = 0.241 mH
Z = 4 ohms
BL = 1.581 lb/A
Pe = 300 watts
Qts = 0.432
1-W SPL = 89.58 dB

Little bit different from the ones above^^^^

__________________
Location: Vancouver, B.C.

Those are awesome subs. I wish I had a couple still. The diffenence is a lot between the Specs I had and the specs Jeepbeats had. Best to find out the exact model, and go from there. Is there any coding on the back?

__________________
<img src="http://www.geocities.com/ysr80cc/banner.jpg" alt=" - " /> <br /><br />Kicker 500SI, Two 2.3KW RMS Earthquake D2's <br />DD 9515 (SPL/SQ BEAST!!!!!)<br />Full DynAudio/Scan-speak full-range set-up... Panasonic Ghost face deck

Rob what you have are a pair of Kicker XPL-KX10.4

As Loud stated they are from the '96-97 era and are quite different than the newer style XPL's (X10c) which had a slightly higher power handling rating (350rms), lower sensitivity (88.5dB), and different cone material.

Yours are rated at 300rms and have a sensitivity number just shy of 90dB.

Personally I never got a chance to audition the first gen. XPL's but I did try out the second gen's and I thought they were a great driver.
Handled a good amount of power, worked in many smaller enclosures and sounded excellent.
A bit expensive for what you were getting I thought but a good performer still.

__________________
Pioneer - MB Quart - OZ
http://www.cardomain.com/id/37554
"Your sister is hot but your mom does that thing with her tongue..."

Well I paid $100 for both. Now I got make a sealed enclosure for them.