 | |  | |  | | CCA Golden Toque
Join Date: Nov 2002 Location: Chilliwack, BC Posts: 2,689
| Oops, that 31¾" port is too long. Better make it 29½" long and 10½"x 3½". That'll give sufficient clearance. | 
|  | |   | | | | | CCA Hoser
Join Date: Jun 2003 Posts: 369
| I wish i read this a little sooner. I just orderd the peice. It's going to bu a fused plexi port that will be in my viewing window. The port will be 6"x4"x14". Thats what winisdPro gave me to produce a good low end with a ver flat response. I know the plastic guy so he only charged me $20 for the materials and the work. I was pretty happy since I was told by some installers that it would be over $100.
__________________
Xmax 15 in 4.5 cubes tuned to 28hz<br />Eclipse 6x9's <br />Infinity 605cs comps<br />Alpine 7863<br />US Acoustics 4050<br />Kicker KX 400.2 | |
| | | | | | | | CCA Golden Toque
Join Date: Nov 2002 Location: Chilliwack, BC Posts: 2,689
| Oh well. I'm sure It'll work for ya. A PG sub like that wouldn't move as much air as say a stroker or an Eclipse Ti, but it should be a good performer. After all, the box design looks to be for SQ rather than SPL. | |
| | | | | | | | --SPECIAL ED--
Join Date: Dec 1969 Posts: 0
|  Quote: |
Originally posted by Chadxton:
28Hz? Your ports are going to be a billion inches long!
Ty, if his ports are going to be 3 x 8.5", he's going to have 25.5 sq in per. So that's 102 sq inches of port, I think he'll be fine.
Give me a minute here, Gettnbig | psst - he was talking 3" diameter round ports that were 8.5" long  That's only a hair over 7sqin per vent. | |
| | | | | | | | CCA Golden Toque
Join Date: Nov 2002 Location: Chilliwack, BC Posts: 2,689
| | Quote: |
Originally posted by Dukk:
psst - he was talking 3" diameter round ports that were 8.5" long That's only a hair over 7sqin per vent. | (banging head against desk) That's why it didn't make any sense! I made it nonsense, Gah! | |
| | | | | | | | CCA Hoser
Join Date: Jun 2003 Posts: 369
| Yeah, it's going to be an SQ set up that I hope will get loud when I want it to. It's a daily driver so I just want it to sound good. It should be loud considering I thought my 10" xmax with 200 watts loud. Now I have a 15 with 500! I should be very happy! 
__________________
Xmax 15 in 4.5 cubes tuned to 28hz<br />Eclipse 6x9's <br />Infinity 605cs comps<br />Alpine 7863<br />US Acoustics 4050<br />Kicker KX 400.2 | |
| | | | | | | | CCA Hoser
Join Date: Jun 2003 Posts: 369
| oh, thanks for all the help Chadxton. Much appreciated. [img]graemlins/thumb.gif[/img]
__________________
Xmax 15 in 4.5 cubes tuned to 28hz<br />Eclipse 6x9's <br />Infinity 605cs comps<br />Alpine 7863<br />US Acoustics 4050<br />Kicker KX 400.2 | |
| | | | | | | | CCA Golden Toque
Join Date: Jun 2001 Posts: 3,261
| | Quote: |
Originally posted by Dukk:
</font><blockquote>quote:</font><hr />Originally posted by Chadxton:
28Hz? Your ports are going to be a billion inches long!
Ty, if his ports are going to be 3 x 8.5", he's going to have 25.5 sq in per. So that's 102 sq inches of port, I think he'll be fine.
Give me a minute here, Gettnbig | psst - he was talking 3" diameter round ports that were 8.5" long That's only a hair over 7sqin per vent. </font>[/quote]BINGO! not enough port area.
__________________
Tyler Johnstone<br />Orion_95@hotmail.com<br /><br />'Good judgement comes from experience. Experience comes from bad judgement'<br /><br />'Former' Install Manager - AVU Smithers | |
| | | | | | | | CCA Hoser
Join Date: Jun 2003 Posts: 369
| How are you getting inches squared for the port when it's 3 dimentional? shouldn't it be cubic inches?
Do I have enough port area now?
__________________
Xmax 15 in 4.5 cubes tuned to 28hz<br />Eclipse 6x9's <br />Infinity 605cs comps<br />Alpine 7863<br />US Acoustics 4050<br />Kicker KX 400.2 | |
| | | | | | | | CCA Hoser
Join Date: Jun 2003 Posts: 369
| You must just be talking about the opening? If so I now have 24^2 inches rather than 14 for the round ports. Is 24^2 going to be ok?
__________________
Xmax 15 in 4.5 cubes tuned to 28hz<br />Eclipse 6x9's <br />Infinity 605cs comps<br />Alpine 7863<br />US Acoustics 4050<br />Kicker KX 400.2 | |
| | | | | |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | | Thread Tools | | | | Display Modes |  Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | |
|  |
 » Recent Threads | | | | | | | | | | | |
