 | |  | |  | | Alpine 9855 putting out 1 volt. Any ideas? | | ~~ VENDOR ~~
Join Date: Oct 2000 Location: TORONTO Posts: 6,888
| i have this deck and it's only producing 1 volt in all of its rca outs. Front, rear and sub - all 1 volt at full volume.
Is there a feature on the deck which controls this or is this deck broken? | 
|  | |   | | | | | CCA McKenzie
Join Date: Jul 2004 Location: Kitchener, ON Posts: 627
| how did you measure it? 0db tone, what frequency, multimeter?  | |
| | | | | | | | CCA Golden Toque
Join Date: Feb 2001 Posts: 1,126
| I find when my deck does that its related to the power getting interupted on the deck which resets all of the bass boost and loudness and sub control features which tends to greatly reduce the output. Did you disconnect the battery recently?
__________________ 
Current Canadian Record holder Street A 154.1dB
2008 dBDrag North American Finals 3rd Place 155.0dB
2 10" TF Ones + 1 American Bass 1000.1 + Odyssey 1750 | |
| | | | | | | | CCA McKenzie
Join Date: Jul 2004 Location: Kitchener, ON Posts: 627
| there's also 'defeat' function i think. check it out. | |
| | | | | | | | --SPECIAL ED--
Join Date: Dec 2004 Posts: 987
| I have seen this before as well Iouli seems the problem is its Pine. lol | |
| | | | | | | | ~~ VENDOR ~~
Join Date: Oct 2000 Location: TORONTO Posts: 6,888
| i measured it with 0 db tone. defeat was OFF and i used a multimeter on the rca outs. measured it at full volume on the deck.
all the settings were set at their normal levels.
are there any other functions other than Defeat that could decrease the output signal? The 1 volt signal is on all of the outputs - front, rear and sub.
Tom does your alpine deck have Loundess setting? | |
| | | | | | | | CCA Hoser
Join Date: Oct 2007 Location: BC Posts: 93
| Mine does. If you push the volume button down and hold it for 5 seconds, Loud turns on. Yours might be different, but its worth a shot.
**I have an Alpine deck | |
| | | | | | | | ~~ VENDOR ~~
Join Date: Oct 2000 Location: TORONTO Posts: 6,888
| im gonna try that. | |
| | | | | | | | CCA Hoser
Join Date: Sep 2007 Location: NS halifax Posts: 195
| yuli.mine does the same thing after the battery has bin unhooked.i need to go into advanced MX settings and reset everything.i have the alpine D-310 | |
| | | | | | | | ~~ VENDOR ~~
Join Date: Oct 2000 Location: TORONTO Posts: 6,888
| my D310 has MX settings and they also reset, i know this.
does the 9855 have same MX settings somewhere? | |
| | | | | |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | | Thread Tools | | | | Display Modes |  Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | |
|  |
 » Recent Threads | | | | | | | | | | | |
Quote:
