so i got two amps im having a hard time decided on:

HIFONICS BXI-2607D
2,600 WATT Mono Block Class "D" Monster Subwoofer amplifier
2,600 x 1 RMS @ 1 ohm
1 ohm stable
1,700 watts @ 2 ohms
Mosfet power outputs
RCA Outputs
Advanced Class Super "D" Setup
All new efficient Heatsink Design
Hifonics Logo Illuminates in bright neon illumination
Power and Protection LED indicator
Gold RCA Inputs
Daisy Chainable (you can connect 2 amps and get double the power together)
Built in advanced crossover system
Balanced line inputs
Soft Start Turn on for extra long lasting amplifier protection
Subsonic bass filtration system
Low Pass Filter: 35 - 240 Hz (24 Db PER OCTAVE)
Bass Boost: 0 - 18 dB
Phase Shift: 0 - 180 degrees
24 dB Subsonic Filter (15 - 50 Hz)
Dimensions: 16.5" L x 10.39" W x 2.63" H
S/N Ratio: >95dB
THD: <0.08
Frequency Response: 2-250 HZ
Requires 2 gauge power and ground leads (0 or 2 gauge amp kit)

SOUNDSTREAM PCX2000D
RMS Power @ 4 ohm: 1100W x 1
RMS Power @ 2 ohm: 1500W x 1
RMS Power @ 1 ohm Mono: 2000W x 1
TSTTM (Twin Stack Technology) Allows 2 amplifiers to power single load
FR4 Circuit Board
Mono-block Mosfet Class D Circuitry
Continuously Variable Low-Pass Crossover
Continuously Variable Subsonic Filter
Variable 18dB Bass Boost
Platinum RCA and Power Inputs
1 Ohm Stability
Accepts up to 16V DC Power Input
Glossy Black Hairline Anodized Heatsink
End Caps for Professional Installation
THD: 0.50%
S/N ratio: >85
Damping Factor: >200
Input Sensitivity: 200mV-8V
Subsonic Slope: 24dB
Subsonic (Hz): 15 - 40
Low Pass Filter(Hz): 50 - 150
Low Pass Filter slope: 24dB
Subwoofer EQ.: 0-18dB
Phase (degree): 0 - 180
Remote Bass Boost Control included
Dimensions:10"(W)x2.5"(H)x22.2"(L)

the hifonics amp says it is made to be easy on your electrical system which is good but im not really sure about the amp its self because i have heard anything about them. i have always heard soundstream amps were well built but haven't tried there mono amps personaly.

just looking for any input on these amps if anyone has some. thanks.

I would suggest going with the hifonics. You will get more power out of it. But also i would suggest getting the 2608 model which is this years model, the boards and build have changed for the better.

__________________
LOW TONEZ AUDIO

ive used that line of soundstream amp before and they are solid, give more than rated power

__________________
Team Banana
Team Army Of One
Team Big Robot Head
Team Asshole
Team Deezy
2004 Chevy Aveo
2 TF1 10's
1 Atomic AT5000.1D
1 NSB75
Lots of 1/0 wire

2007
151.5 Certified Street A Loudest Street A Trunk Car (1996 Dodge Neon)
1st competitor to Qualify in the world 2007 Db Drag world finals.


2008

149.9 Certified
150.4 uncertified
151.1 CSPL

ill add that ill be putting 2 of what ever one i choose to 2 10" tf1's when ever yuli gets some more in.

if its for 2 10's I'd get the bigger out of the 2 amps.

__________________
Team Fear Of Bass

Friends dont let friends run mattsonics. lol

Would you say that to Team WCA, Rusty, Team Livewire, and many others using them. And its Maxxsonics not mattsonics.

__________________
LOW TONEZ AUDIO

is maxxsonics the same as hifonics?

maxxsonics is liek the parent company of hifonics, crunch, mmats, autotek

__________________
Team Banana
Team Army Of One
Team Big Robot Head
Team Asshole
Team Deezy
2004 Chevy Aveo
2 TF1 10's
1 Atomic AT5000.1D
1 NSB75
Lots of 1/0 wire

2007
151.5 Certified Street A Loudest Street A Trunk Car (1996 Dodge Neon)
1st competitor to Qualify in the world 2007 Db Drag world finals.


2008

149.9 Certified
150.4 uncertified
151.1 CSPL

Maxxsonics owns Mmats? I know they have hifonics, crunch, autotek, MB Quart, but never heard anything about Mmats.

__________________