Hello my friends, I was thinking that I posted this test here, but today I did see that I didn´t post! sorry!

This I wrote on Termpro forum:

I´ve just finished the last test with a SD8000.

We have burped here 112,8Vrms in 1ohm (4x4ohm resistive dummy load), with 12,2Vdc in input...

To be as reliable as possible we used resistive load because the current and voltage have their excursion at the same time, avoiding wrong calculations (as we can see in some tests with high-inductive loads such as speakers)

I recordered everything in a single video (there is a part that was speeded up)

http://br.youtube.com/watchv/oDhRBMB3vok

So 12700W at 1 ohm and with 12,2V at input.

In fact it surprised me a bit, ehehehe. We have already tested in a 18V system with a small quantity of batteries and we did see 13kW but it was a old version, back in 2007. The last version had some moddifications (in part because we know that some companies did buy or received our amps from not-trustfull competitors to make improvements in their amps, or make new ones, and we want to be always in the top here in Brasil)

You can shurely think that something in hidden or whatever, so I´m asking to the competitors that have bought the amplifier to do power tests and record them if possible. (I think here in CCA we already have a couple of SD8000)

For who does not know: SD8000 is OUR project, made in Rio Grande do Sul, Brasil, in OUR company (yes, SounDigital)

PICS:







Best regards people.

I´m looking forward to go to Winnipeg!

__________________
SOUNDIGITAL

murilo@soundigital.com.br

DISTRIBUTOR/DEALER WANTED

good job Murilo

__________________
Team Fear Of Bass

huge numbers, congrats

__________________
Mat
Team Asshole
_________________________

good job. Lookin forward to see them in Canada real soon

__________________
92 Cavalier Wagon
2007 CSPL AMA 2 CHAMPION
2007 CSPL OVERALL POINTS CHAMPION
2008
2 12" TF 1's
2 American Bass 500.1's
10 runs of 1/0
153.7 and climbing
Not bad for a start. Let's see what 2008 brings!!!

very soon !!

__________________
Absolute Car Audio Ltd
509 Clarke Rd.
Coquitlam B.C.
V3J 3X3

604-936-1818
www.absolutecaraudio.ca
contact: absolute.car.audio@hotmail.com

Atomic Speakers Canada Distributors


ATOMIC APXX12 subwoofer & ATOMIC 7000.1 amp

now what would it take to get that kinda result in a car?

__________________
Team Revolution Designs Canada
Team Asshole
The Wrecking Crew
Team IBEU (I Blow Everything Up)

Subs:
2 Bassworx 12.4s played to low
2 dd 9512s too small of port
2 dd 9512s burped to low
2 dd 9512s shitily reconed
1 dd 9515 14 rounds at 20-24 hz

Amps:
3 Bassworx 500.1s blew the mosfets... somehow
1 American Bass 500.1 Blew 3 mosfets and still worked... somehow

2009 Buick bassrace project underway, let the deadening begin, 8 rolls of red zone and 2 cans of expanding foam so far

12 batt's and all fingers crossed

I am still waiting to see some competitor results. Not convinced yet.

__________________
2008 Season
1995 VW Golf 4dr
DB DRAG Street A
NEW SETUP
-(2) TF1 10's
-(1) American Bass 1000.1
-PC1750
-NEW Number 15?.?
TEAM AMERICAN BASS CANADA

and u gotta have 0 rise at 1 ohm

__________________
Mat
Team Asshole
_________________________

I believe that was a resistor test load which u are correct would not have impedance rise because it is resistive not capacitive/inductive

__________________
finally got a new windshield...lets see what happens on the weekend

TEAM MAX-TECH

2005 - 161.2 dB CERTIFIED - 2-RE MT12's on 4 American Bass 200.1

2007 - STREET C - 15" RE MT in a 1995 NEON!
154.2dB 4 AmericanBass 500.1's with way too much voltage drop

2008 - Street C - 15" FI BTL in a 1999 VW Jetta TRUNK!
149.0 on 1 - Powerbass XA3000d
not a bad start for a raw box

Hrm... what makes you say that Peter?

__________________
Check out our page for team info and updates!


SPL Inc.