Kinda new to this, so this is probably wrong!

I am running a set of 2 way Morel Elate Comp. up front powered by JBL GTO 75.4. Rear spks running off deck power work fine. Can't seem to get any mid level out of the components up front, its all highs. Adjusting the crossovers, gains,and freq. has no real affect. RCA from HU to amp, red RCA into front input, Black RCA run into rear input on amp for more power, corresponding wires from output on amp to crossovers. Crossovers bridged. i want one channel/spk for max power to each spk.

I believe you meant to say "amp bridged" and not crossovers bridged.

Check the "Mode" switch's on the amp and make sure both are in the "Flat" selection.

__________________
Pioneer - MB Quart - OZ
http://www.cardomain.com/id/37554
"Your sister is hot but your mom does that thing with her tongue..."

amp is set to flat/mono.

Disconnect one speaker and reverse the leads + to - and - to + and see if you all of a sudden have more midbass. If so then go through all of your wiring to check polarity on the speakers.

__________________
Forbidden Audio Ltd. (1995)
Rob Atkinson

Eclipse / MB Quart / Soundstream / Power Acoustik / Parrot / Pioneer / Pioneer Premiere / Kenwood Excelon / Morel / Focal / Scosche / EFX / MTX / Bass Slammer / Audio Control / Blaupunkt / ARC / Stinger / Streetwires / Metra / Pac Audio / Bassworx / JBL / Infinity / Compustar Pro / Audiovox / Clifford / Autopage / Fusion / CDT and whatever else you need.

Any crossovers in your HU?

__________________
Pioneer - MB Quart - OZ
http://www.cardomain.com/id/37554
"Your sister is hot but your mom does that thing with her tongue..."

I'm not sure if i have crossovers in my HU,. I'm using a Nakamichi CD400.