Hi there everyone. I need some advice on adding to my front stage please. I've got a 5.25 component set already up fron powered by an old school Rodek 280e (Zed Audio) and an Eclipse 8445 head unit. The car is a '90 BMW 735i. The front stage is already quite nice actually and it even surprised the install shop that did the work. I want to add something to the doors however as the 5.25 are in the front kick panels by your feet.

Would a single 5.25, 6.5 driver, coax or an additional full component set be the best for this? I will most likely just run the 280e down to 2 ohm stereo so the rating will basically double 2x160 (as it did in the old days LOL) Would a coax or an additional full component set be too harsh on the highs?

Any help would be great!!!! Thanks

i had that car or almost 1988 735i

i would set that car up like this a good set of focals with the tweeters in the stock placemints the 5 1/4 in the stock place and do a V looking box in the ski pass (the V make a box that has the two subs in the V i think i would do sealed box )

i can not recall if you can get 6 1/4 in with out cutting
i was winning #1st in that car when i had it

__________________
EVERY FAMILY HAS A RETARD IN IT. IF YOU THINK THAT YOURS DOESNT HAVE ONE, THEN ITS PROBABLY YOU.

do not run 2oms for sq

__________________
EVERY FAMILY HAS A RETARD IN IT. IF YOU THINK THAT YOURS DOESNT HAVE ONE, THEN ITS PROBABLY YOU.

http://www.roadfly.com/bmw/gallery/index.php?path=26165,1;-64,6;

see where i have my ports i would do a box that looks lick a v when you look in where i have my ports /if you do what i did you need to cut the firewall that the seat is on

__________________
EVERY FAMILY HAS A RETARD IN IT. IF YOU THINK THAT YOURS DOESNT HAVE ONE, THEN ITS PROBABLY YOU.

Thanks so far zzzzzzzzz!!!

I think I'm on board with the 2 ohm thing as well. Just can't find a friggin nice ole school 4 channel Rodek!!!! Might go old school soundstream though. The current location of the 5.25's does sounds quite nice, you're right. I've got 4-10" JL's and I'm going to be removing the firewall where the ski bag pass through is just like you've mentioned for sure. I haven't decided on the arranagement of the subs yet though... Still trying to work that out as well.

I'm running just 2 of the 10's right now. Just thought I would have to do something else up front when I get the other 2-10's installed.

ok things i know about that car you have room to do 10"kicks in that car there is 6-8" of foam there

__________________
EVERY FAMILY HAS A RETARD IN IT. IF YOU THINK THAT YOURS DOESNT HAVE ONE, THEN ITS PROBABLY YOU.

If the sound is fine now then why mess with it ? If you feel the mids are lacking then the general plan would be to add midbass speakers; and it may be desirable (although not necassary) to increase your mid's crossover point at the same time.....

2ohms is fine for most amps especially at mid-high duty, and if you have a 2ch amp and want to add speakers there should not be a problem... the only hassel is that you don't have electronic xover control over the two speakers and will have to go passive for the midbass....

__________________
SIC Audio

^ X2

going coax is not always a good idea..... even though they provides a single point source...... but they're not time aligned (as tweeter is a few inches ahead of the mid)

I would suggest adding 6" midbass in the doors, but you'll need to run an active x-over (LR 24db/octave) with delays adjustments to work properly. and keep the speaker system above 4 ohms.

Thanks for all the help so far...

I was hoping to hear someone sound off in favour of just a 6" mid bass driver as well

In terms of the active crossover... I need a little help there. I've got a full x-over system in the deck but I'm guessing you're referring to an active x-over apart from that? Any model numbers and brands you might suggest?

THanks again everyone. Keep the help coming!!!

I think I've got a Sony XEC 1000 in the basement... is that what we're talking about?