 |  | |  | | Supporting Member
Join Date: Nov 2006 Location: Ontario Posts: 28
| Hopefully someone can help me here.
My sub is going quiet then loud or vice versa. I will be driving and take a sharp turn or something and my sub will go quieter for a second or two and then go loud. I took it into where I got my stereo installed and of course they couldn't get it to go quiet. Also, one other thing, my sub makes noises even when I have it off is that a problem? |
| | |   |  | |  | | CCA Hoser
Join Date: Nov 2004 Location: Cranbrook BC Posts: 295
| Quote: | |
Originally Posted by RyanR Hopefully someone can help me here.
My sub is going quiet then loud or vice versa. I will be driving and take a sharp turn or something and my sub will go quieter for a second or two and then go loud. I took it into where I got my stereo installed and of course they couldn't get it to go quiet. Also, one other thing, my sub makes noises even when I have it off is that a problem? |
Yeah, it is.
Sounds like a bad ground or signal (Loose/Not bare metal touching/Bad spots for ground wire.)
Is the amp and box bolted down? |
| | |   |  | |  | | CCA McKenzie
Join Date: Apr 2007 Location: Ontario Sudbury Posts: 572
| When you take a sharp turn and it goes lower it is due to voltage drop from your power steering taking it, so like bronco said it could be a bad ground, posibly your electrical cant keep up with all the demands of your stereo when you drive your car. |
| | |   |  | |  | | Supporting Member
Join Date: Nov 2006 Location: Ontario Posts: 28
| ah I never actually thought about the electrical system not being able to handle it. Sometimes it goes lower when I go over a bad bump too though but that could be ABS or traction control or something kicking in. My lights have never dimmed. I only have one amp and one sub. The amp is a M-605? and the sub is 12" Type R. So could it be my electrical or just a bad connection? |
| | |   |  | |  | | CCA Hoser
Join Date: Nov 2004 Location: Cranbrook BC Posts: 295
| either start checking with a multimeter. |
| | |   |  | |  | Yankee 
Join Date: Oct 2003 Posts: 2,377
| Check your wire connections, while the system is up and running do a 'wiggly-jiggly' of your wires (ALL of them power, RCA, speaker) and see if you can reproduce the issue. Does the affect happen on L turns/ R turns/ brake application/ bumps etc, since that is what you need to reproduce because this is a mechanically induced electrical problem.
And I bet your installer didn't take it for a ride did he... shame on you
The problem could be in the trunk with the gear or even in the dash... or even inside an amp or speaker box. |
| | |   |  | |  | | Supporting Member
Join Date: Nov 2006 Location: Ontario Posts: 28
| Well I got it installed in January I believe and it worked perfect untill around May when I started to notice the bass going lower at times. So I brought it in and it ended up being the fuse. It was fine untill around July. |
| | |   |  | |  | | CCA Hoser
Join Date: Sep 2006 Location: Edmonton, AB Posts: 456
| It sounds to me like a loose connection. Pull your sub out, check the wires. Check your ground.
Ensure that nothing is grounding out. If it is happening on bumps and turns, it has to be a loose connection.
Also, check to see if the wires on the sub itself are still connected properly.
__________________ 2007 Mazdaspeed 3- Eclipse CD7100
- Digital Designs 9515
- Hifonics BXi 2006D
- Soon to be installed: TS-C720PRS
|
| | |   |  | |  | | CCA Hoser
Join Date: Nov 2006 Location: ontario canada Posts: 222
| sounds like a bad connection some where
__________________ THE WORLDS BEST ENGINE IS A .....FANNY it takes any size piston is self lubricating starts with 1 finger
changes its own oil every 4 weeks ....ITS A PITY THE MANAGEMENT SYSTEM IS SO DAMM TEMPERAMENTAL !!! |
| | |   |  | |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | | Thread Tools | | | | Display Modes | Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | |  | » Recent Threads | | | | | | | | | | | |