hey guys i need some help...
the woofers on my psds are making a pop sound everytime the bass hits hard at high volume....

how can i fix it??.... i've been fiddling with the crossover on the amp.... but i dunno what to do?

turn the volume down. oh and buy the way talk to patrick at trends and get a new set as you have now damaged your voice coils!! mb quart drivers are made to run in a free air setup ex. in a door. they dont work well in a sealed kick panel. if you are running them in a kick panel x them over no less than 200hz and up. this will definitly take care of the problem. keep them wired up as normal but put a 200mf cap on the positive lead of the woffer. good luck and enjoy pop free music. long live rock and roll.

__________________
yellow car with mtx system in it.

... or buy Rockford and crank 'em!! [img]tongue.gif[/img]

__________________
12 Inches is useless..until you put it in the right sized box

Obcon..... the best slot you will ever have....

hahahhah. very funny mike. email me if you would like to find out what can be done about your quart(which is a rockford anyways, [img]smile.gif[/img] )

use "quart question" in the subject line.
patrick@trendsinc.com

we shall see what can be done

put a high pass crossover on them like 90-100 hertz and up

__________________
2007chev impala<br />kenwood dnx8120<br />jl audio 500/1 and 300/4 <br />polk momo 12 inch subs<br />polk mm6501 components<br />polk momo coax rear fill<br />compustar security<br />clarion headrest screens<br />certified iasca judge

200hz high pass , maybe at 6db/octave

ya i just fixed up... i turned down the gain and turned up the crossover... i think they're somewhere around the 100hertz range.

thx a lot guys.