i have couple of 6x9 speakers sittin in my garage
and my car has 4 speakers
just wonderin if its possible to add 2 more rear speakers?
plz advice

__________________

If you have a power source and a way to mount them its all good!

You shouldnt have a problem.....

__________________
EGA 700.2
EGA 680.4
HiFonics XXV Colossus II 3200 MONO
HiFonics XX Colossus II 3200 mono
Tarantula 960.4
Tarantula 6.5 x18speakers 120RMS
Tarantula 6x9s speakers 150RMS
Tarantula T4 Subs. X2 900 RMS 1Ohm
Van Gogh 6.5 Components 150RMS
SC40 Farad Capacitor
Big "3" 180AMP @ idle Alternator (custom made).
210 sq Ft BrownBread.
2 Red Tops.
2 Yellow Tops
Alpine 9855

so can i add those 2 speakers to the same connection
i already have on rear speakers? just run few more wires and make a connection?
will that be a prb?

__________________

That could be a problem.
If your current rear speakers are running off the deck power, then don't add the extra speakers. Decks don't like a 2ohm load - both factory and aftermarket decks. The deck will heat up excessively and possibly thermal protect out (I did that with my old kenwood).

If your rears are already on an external amp you are most likely fine because almost all recent amplifiers are 2 ohm stable.

Short answer:
Don't do it if your speakers are running off of the Deck (Head Unit)
Do it if you have an amp for them.

__________________
Nostalgia just isn't what it used to be.

dido, Its well worth it you will notice a huge differece.

__________________
EGA 700.2
EGA 680.4
HiFonics XXV Colossus II 3200 MONO
HiFonics XX Colossus II 3200 mono
Tarantula 960.4
Tarantula 6.5 x18speakers 120RMS
Tarantula 6x9s speakers 150RMS
Tarantula T4 Subs. X2 900 RMS 1Ohm
Van Gogh 6.5 Components 150RMS
SC40 Farad Capacitor
Big "3" 180AMP @ idle Alternator (custom made).
210 sq Ft BrownBread.
2 Red Tops.
2 Yellow Tops
Alpine 9855

i m bit confused
so the + and - wire should be connected to the amp, right?
thats all i have to do, in order to make them work?

__________________

provided you have a 2 ohm stable amp...

__________________
87 Nissan Hardbody/truggy. Tube frame. full EXO. 39.5" IROKs. 18" FOA coilovers ft/rr. D60's. 5.89

4.3/4l60e/207/205-all sold. now putting a TBI 350, 700r4(.5"valve, corrvette servo, red band, shift kit), 203/205 triple stick.

______________________________/\/ / _\'' /\/\ ()_______________________________

i have MTX amp....
not sure abt the model #
i will have to check
but how would i know if its 2ohm?
thxns

__________________

MTX ...
Unless its a real old school MTX it will be 2 ohm stable.

__________________
Nostalgia just isn't what it used to be.