i want to run 2 amps a 4 channel and a 2 channel, heres the Q

I'll be running the rca cable to the deck from the 4 channel amp and the REM turn on wire also to the deck. The 4 channel amp has an rca cable output to piggyback another amp without running another cable from the deck to the second amp, so if i do that, do I have to run a second REM wire from the 2 channel, or will the REM on the 4 channel turn on both amps with the same switch ?

__________________
94' Mazda Mx3 - 2.5L 5spd
Pioneer DEH-P7600mp
Lightning audio 5.25"s
Lightning audio 5x7s
Lightning audio B.150.2 amp
Lightning audio B3.12.4 woofer

You wont have to run a second rem from the deck. What you have to do to turn on the second amp is run the rem from the first amp (which is connected to the deck) to the second amp...See Below...
untitled.bmp
Hope this helps...

ok good, thanks for spelling it out

i havent really installed car audio other then replacement speakers

__________________
94' Mazda Mx3 - 2.5L 5spd
Pioneer DEH-P7600mp
Lightning audio 5.25"s
Lightning audio 5x7s
Lightning audio B.150.2 amp
Lightning audio B3.12.4 woofer