 |  | |  | | CCA McKenzie
Join Date: Oct 2004 Location: Oshawa, Ontario Posts: 884
| ok, so i was having trouble getting the factory deck out, but i ended up breaking the whole deck, just around the edges so i could get soemthign in there to push those clips on the side in....
my questions are, how do i put a new deck in?....
do u bust the rivets holding those clips on?...
also those clips dont look like they can go anywhere on my deck...am i missing soemthing?...
the guy at the audio shop said it was straight forward and there was no aftermarket mounting hardware required.....any help would be greatly apreciated...thanks in advance..
Mat
__________________ Mat
Team Asshole
_________________________  | 
|  | |   | | | | | CCA McKenzie
Join Date: Oct 2004 Location: Oshawa, Ontario Posts: 884
| ok, so ive just jammed my deck in and im hoping it stays in.....does anyone know how to keep it in, or is the right way just pressign it in and thats it?
__________________ Mat
Team Asshole
_________________________ | |
| | | | | | | | Moderator
Join Date: Dec 2005 Location: Kitchener, ontario Posts: 1,517
| well I am almost certain, when you get the metra kit for this vehicle that it is supposed to just clip into place, and then that holds it in place, my buddies ranger is the same way , and I think its a horrible system , but it holds his indash screen even while its coming out it never falls out..
__________________
I've seen many things in my time, but to achieve any of them is a different story! | |
| | | | | | | | CCA McKenzie
Join Date: Oct 2004 Location: Oshawa, Ontario Posts: 884
| so there is a mounting kit for it?....its just that its so tight i didnt think there could be one, and the guy at the audioshop said there wasnt one...but if there is one do u know where abouts the GTA i can gte one?
__________________ Mat
Team Asshole
_________________________ | |
| | | | | | | | Black Void Member
Join Date: Feb 2006 Location: Red Deer, Alberta Posts: 145
| I'm pretty sure the 93 grand marq is a DIN opening.
__________________
Shaughnessy Murley
Install Ninja
Red Deer, Alberta | |
| | | | | | | | CCA McKenzie
Join Date: Oct 2004 Location: Oshawa, Ontario Posts: 884
| yea, thats wat it seems like...ok, thnx tho
__________________ Mat
Team Asshole
_________________________ | |
| | | | | | | | Black Void Member
Join Date: May 2004 Location: Port Hope Ont Posts: 738
| That car is easy like most fords
1,get some uninstall keys
2,insert remove radio
3,solder all your conections
4,take mounting cage,snap it into place with tabs
5,take new HU with locking clips on side
6,slide it in
From the factory radio yiu broke did it say automatice on Cassete portion | |
| | | | | | | | CCA McKenzie
Join Date: Oct 2004 Location: Oshawa, Ontario Posts: 884
| i dont know...i broke it good tho...lol...also i didnt use any factory wires at all...but thnx, i figured out the cage thing anyways, thnx for the reply tho
__________________ Mat
Team Asshole
_________________________ | |
| | | | |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | | Thread Tools | | | | Display Modes |  Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | |
|  |
 » Recent Threads | | | | | | | | | | | |
