 |  | |  | | Front Speakers DOING some mad CRACKLING..... | | CCA Hoser
Join Date: Dec 2004 Location: Kitchener, Ontario Posts: 205
| Alright while driving today my front left speaker started cracking really bad reallly reallly bad. You guys hopefully know what that sounds like.
So i fold the seat d own to expose the amp powering fronts.......cracking goes away. check all connections all are fine. Put seat back up, amp now vertical,,,,cracking starts again.......
Is my amp possessed? Lol does anyone have any suggestions? I know for temp fix i just drive with the seats down but for longterm what do i do? |
| | |   |  | |  | | Black Void Member
Join Date: May 2000 Location: Ajax, ON Posts: 311
| check all the connections at the amp.
mainly the rca's if they are bent too tight the leads may be broken inside where you cant see.
test the rca's for continuity be sure to wiggle the ends around as you do the test.
chances are an rca has crapped out on you |
| | |   |  | |  | | CCA Hoser
Join Date: Jul 2006 Location: Louisiana Posts: 333
| it,s not a jl amp is it ? mine was doing that last week
__________________ premier prs 880
focal k2p upgraded 6.5,s
tn52 tweets
2 jl 300/2,s
jl 500/1
2jl w7 8"s
tuned to 30 hz |
| | |   |  | |  | | CCA Hoser
Join Date: Dec 2004 Location: Kitchener, Ontario Posts: 205
| Quote: | |
Originally Posted by theif it,s not a jl amp is it ? mine was doing that last week | No. It's a phoenix gold titanium ti400.2
I don't think its the rca's but will run a new pair this weekend. |
| | |   |  | |  | | CCA Golden Toque
Join Date: Nov 2004 Location: ontario, woodbridge Posts: 2,000
| sounds like something is getting pinched, shorting, or pulled when the seat is lifted. Get in the trunk and have someone lift the sea. Look closely to see what's happening, I'll bet that either as above, the rca's are moving, or the speaker wires are touching something (amp case, metal, each other). Good luck!!
__________________ 2004 300M SPECIAL
Alpine CDA 9833
Alpine Pxa-h701
Alpine Rux-c701
Rockford fosgate p400-4
Rockford fosgate p4004
Hifonics BX 1205D
JBL c608 GTi
JBL p963
Infinity 2.5" center channel
Alpine type R 12"(2)
all active SQL set up with 2000 watts rms |
| | |   |  | |  | | CCA Hoser
Join Date: Dec 2004 Location: Kitchener, Ontario Posts: 205
| Quote: | |
Originally Posted by veeman sounds like something is getting pinched, shorting, or pulled when the seat is lifted. Get in the trunk and have someone lift the sea. Look closely to see what's happening, I'll bet that either as above, the rca's are moving, or the speaker wires are touching something (amp case, metal, each other). Good luck!! |
ive tried that exactly. and nothign getting pinched......nothign loose all stuff is tight........im thinking somethign farked up in the amp should open it up.....buddy was suggestion its the rca's internal connections........... |
| | |   |  | |  | | CCA Golden Toque
Join Date: Nov 2004 Location: ontario, woodbridge Posts: 2,000
| ^^ very possible. Something may be loose inside, and when it's standing upright it's touching something it should not.
__________________ 2004 300M SPECIAL
Alpine CDA 9833
Alpine Pxa-h701
Alpine Rux-c701
Rockford fosgate p400-4
Rockford fosgate p4004
Hifonics BX 1205D
JBL c608 GTi
JBL p963
Infinity 2.5" center channel
Alpine type R 12"(2)
all active SQL set up with 2000 watts rms |
| | |   |  | |  | | CCA Hoser
Join Date: Dec 2004 Location: Kitchener, Ontario Posts: 205
| Quote: | |
Originally Posted by veeman ^^ very possible. Something may be loose inside, and when it's standing upright it's touching something it should not. | well ill be ripping the amp apart tomororw then for sure.....and maybe buy a new set of rca's....... |
| | |   |  | |  | | CCA Hoser
Join Date: Jul 2006 Location: Louisiana Posts: 333
| this was my problem , Caused severe crackling . problem solved . I had over tightened the screw on the amp and it went through the plastic beneath it and settled a hair away from the casing of the amp , and when the bass shook the amp too much it caused the screw to get close enough to the amp casing for current to arc across the gap , but only on the downward cycle of the vibration ,which explains why it only happend with subs at high volumes , good news , every thing survived undammaged .
__________________ premier prs 880
focal k2p upgraded 6.5,s
tn52 tweets
2 jl 300/2,s
jl 500/1
2jl w7 8"s
tuned to 30 hz |
| | |   |  | |  | | CCA Hoser
Join Date: Dec 2004 Location: Kitchener, Ontario Posts: 205
| O man i opened up the amp today and this 1cm by 5cm think piece of metal fell out. I put the amp back in and all is good. Something musta been being shorted out from that tiny metal strip. |
| | |   |  | |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | | Thread Tools | | | | Display Modes | Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | |  | » Recent Threads | | | | | | | | | | | |