when installing a new deck, hooking up the power antenna to the power antenna wire off the deck is the only proper way to get your antenna to go up and down?

or do you need to buy something else?

i always thought it was just teh 1 wire...

thanks for your time...

There are three wires that go to you antenna, a black one for ground, a red one for positive (5.5v iirc) and a yellow or blue remote wire. For your antenna to go up and down, you have to connect the remote wire to the blue wire coming out of your deck (and have power running to the antenna). Don't forget to connect your antenna signal feed (the black wire with a tube thing on the end)

What car? On some cars the control wire at the deck is not a simple +12v connection..

__________________
Paul Niwranski
1966 Cadillac Superior Crown Royale Limousine Hearse

If you're mirrors ain't shakin...you got taken...
RIP Member #8
Be careful what you wish for...

thanks for the info bro...

so for this methed, the antenna remote sounds simle, power wire off teh antenna to teh same poser wire 12+ to teh deck?
as well as teh ground, do i use teh same main deck ground?

so i will see 3 wires under teh dash for teh car power antenna then?

thanks again

actually was gonna help a buddy out, i think its his maxima.

how would i know if teh above method is teh right method for this car?

i havent takken a loko under teh dash yet

thanks for your time guys