I have a Kicker KX350.4 that I bought to power my speakers. I bought a pair of CDT CL60CV's which do 130w RMS for the front, and a pair of older Pioneer 3ways which do 50w rms. My amp only puts out 60w x4 @4ohms, or 175w x2 @4 ohms. Should i just run the CDT's bridged off of the 4ch amp? or should I power them all at 60w rms? Would the CDT's sound much better getting their full power fix? I would run the Pioneers off of the deck power (22w RMS).
I'll upgrade the amp later, probably around the same time I upgrade my rear's.

i would like more info
like what will the tweeter hold power going to it
if it will not do 60 then i would bridged and run 175

__________________
EVERY FAMILY HAS A RETARD IN IT. IF YOU THINK THAT YOURS DOESNT HAVE ONE, THEN ITS PROBABLY YOU.

Just wire each speaker to each channel. 60w is plenty of power for any speaker.

Well the CL-60CV's do have the external crossover, the rear Pioneer's have them on the speaker. The Tweeter Model number is TW-19 by CDT.

Specs on the Speakers(CDT CL-60CV)
6.5" 2-way convertible system
6.5" Carbon Treated Paper Cone
Crossover: EX-450 Elliptic 4th/5th order 2-way
Tweeter: TW-19 3/4" Smooth Silk Dome
Power handling: 100Watt RMS @ 100Hz High-Pass
Frequency response: 65-20kHz
Sensitivity: 90.6 dB
Impedance: 4Ohm
Surface & swivel flush mount housings

My bad, the speakers only do 100w RMS.