I have 0 guage power wire in my 1999 Oldsmobile LSS and im not sure as where to run it through the firewall. Has anyone done this on this car or a similar car like an eighty eight.

0 guage will most likely need a hole that you have to drill yourself.

__________________

The W bodies have a big factory grommet under the passenger firewall carpet, those might too.

__________________
Alpine IVA-W200
Alpine PXA-H701 optical
Blade SE6175
Morel Elate 6 3 way active
Sony XM2000R
MTX 12" 7000 x 3 freeair

Finally moving into the 21st century...

yup, in most GM's, there is a big grommet for the factory Chassis wiring. It has way too much rubber/plastic around the wires.
I drilled a 1/2" hole in the same grommet, right beside the existing wires. Obviously you have to be very careful. I started with a small pilot hole and worked my way up with 3 different sizes.

__________________
Alpine CDA-9887, TUA-T500HD, CHA-S634, CHA-1204 & KCA-410C
Pioneer TS-A6981, 6 x GM-5100T
Kicker 2 x CVR15,
MBQ RCE-216
PG MX2
Soundgate LanStar1
PAC SWI-ALP