Hi there...

Today, I installed a capacitor for the first time. All the connections are ok and all is working fine. But what puzzuled me, is that the volt indicator on the capacitor is always "ON". Should it turn itself off after sometimes ? If it stay's on all the time, will that drain my battery ?

Thank's for your time

iv never had a cap but what your saying would make sence to me, although im sure if its just the lcd screen u wouldnt run into a whole lot of problem unless its cold or u your battery is old and low

I have a streetwires cap with a digital display. It stays lit for about 5 minutes after I get out of my car. Also, if I unlock my doors with my key fob, the display lights up. Almost seems that when it detects and current draw or change, it lights up. Shouldnt be anything to be too concerned about. Just keep an eye on your battery voltage..

__________________
I love the smell of fiberglass in the morning!!

'07 Jeep Grand Cherokee Laredo
-1x MTX 9500 12"
-1x Alpine PDX 1.1000
-1x Pioneer DEH-P7800MP
-100 Sq Ft B-Quiet Ultimate

'00 Civic
-2x Alpine Type X 10"
-1x MTX TA81001
-1x Pioneer DEH-P6800MP
-100 Sq Ft B-Quiet Ultimate

From my experience with caps, the display would stay on if they is any change in voltage. If the voltage is constant for a few minutes (eg when you turn your car off and lock the doors), the display should shut off within a couple minutes...

__________________
smpl_gy running a smpl system...
one amp, one sub and 1.6 kilowatts of 50hz and below...

Thank you for your help. I will let the capacitor connected for a while and monitor my tension daily. I'm sure that the display itself will not drain my battery alone, as it's not drawing enough power on it's own. But I'll monitor it closely. Just to make sure. In the end, I'll probably buy another Cap.